Information And Function Windows - ADInstruments AD1000 User Manual

Show A/B marker:
Ø Click {Markers} label in OTDR main interface and markers or marker labels
will show in trace display area.
Ø Or press turning knob once.
Move marker quickly:
Ø Select and hold the marker, drag it left or right to move quickly.
Ø Or click [
right.
Move marking precisely:
Turn turning knob clockwise to move marker right.
Ø
Ø Turn turning knob counterclockwise to move marker left.
Switch A/B markers:
Ø Click [
Ø Or press turning knob once to switch.
Ø Or click the marker to select in trace display area with stylus or mouse.
u
When holding and moving marker with stylus, please apply adequate force
or the operation may not be successful. Please try several times to get
used to it.
u
Marker operation and re-analysis are not applicable to '.jpg" format trace.

7.8 Information and Function Windows

Information and function windows are located at the bottom of OTDR interface.
Information includes: Event list, measurement parameters, markers information (A/B
marker, marking points and etc.), trace parameters and trace information.
] [ ] button on {Markers} label to move active marker left or
] or [ ] button to switch A/B markers on {Markers} label.
AD1000 User's Manual
- 42 -