16 Instruction of MPN Module of AD1000
16.1 Main Features of MPN Module
Ø
Simultaneous Triple-play PON signals at 1310, 1490, 1550nm wavelength
measurement
Ø
Burst mode 1310nm upstream signal detection & measurement
Ø
Dual-port pass through design
Ø
Stabilized laser source at 1310, 1490, 1550, 1625nm wavelength
Optical power meter at 850, 1300,1310,1490,1550,1625nm calibrated wavelength
Ø
the optic outputs of fiber optic network equipment, test equipment, patch cords, or test
jumpers.
Ø Always avoid looking directly into the optic output port, when the instrument is
working.
Ø Always replace protective dust caps on the detector port when the instrument is not
being used.
Ø Always avoid looking directly at the unconnected end of optic fiber in testing and make
the unconnected end pointing at a non-reflective object, if possible.
16.2 MPN Module Interface
When power on, it will show the main menu automatically.
In main menu, select"Multi-Func module", click
interface, as follows:
Laser Radiation: To avoid serious eye injury, never look directly into
AD1000 User's Manual
button to enter MPN user
- 86 -