Table of Contents
Advertisement
other traces, please close some opened traces.
11.3 Close trace file
Close trace file:
Click [close trace] button on the upper right corner of the interface to close the
trace file.
open new trace will close the opened trace automatically, this will reduce the
operating steps and make it easier to use.
11.4 Trace display and operating instruction
After trace opened, application program will display the trace and analysis result in
the trace window. The events on the trace will be marked by small icons, these
events marked and display below the trace.
X axis shows the relative distance from the testing point.
The number on the Y axis shows the reflection power value (relative power) and its
range.
After get the trace, the trace display parameters can be revised (like grid line and
zoom window screen). Please refer to the paragraphs of "trace display parameters
configuration"
Some items of trace can be saw all the time, but other items displayed when select
to display them or switch the options from one to another.
Event options:
System can open 4 traces at the same time. When need to open
Using tip: when under single trace mode (none multi traces mode),
The content of trace window change accord to options change.
AD1000 User's Manual
- 54 -
Advertisement
Table of Contents
