Front Panel Function Keys; Numeric Keyboard - ADInstruments DSA2016 User Manual

2.1.2 Front Panel Function Keys

FREQ:
Set the center, start and stop frequency; enable the signal tracking function.
SPAN: Set the frequency span of the sweep.
AMPT: Set the reference level, RF attenuator, scale and the unit of Y-axis, etc. Set the reference
level offset, maximum mixing level and input impedence. Execute auto scale and auto
range as well as turn on the RF preamplifier.
BW: Set the resolution bandwidth (RBW) and video bandwidth (VBW).
Select average type.
SWEEP: Set the sweep and trigger parameters.
TRACE!Set the parameters related to trace and filter types.
MEAS: Select and control the measurement function
MODE!Select mode
FILE!Save files
UTILITY!Auxiliary function
MARKER!Read the amplitude, frequency and sweep time of a certain point on the trace.
PEAK!Open the peak search menu and search for peaks immediately.
MARKER!Set other system parameters on the basis of the current marker value.
COUNT: Frequency counter function
PRESET: Restore the system to factory settings or user-defined state.
AUTO: Search for signals automatically within full frequency range.

2.1.3 Numeric Keyboard

DSA2016TG provides a numeric keyboard at the front panel (as shown in the figure below). The
numeric keyboard which supports the Chinese characters, numbers and common symbols
(including decimal point, and -) are mainly used to edit file or folder name.