Table of Contents
Advertisement
4.1
Product CD/DVD
The GENE-APL5 comes with a product DVD that contains all the drivers and utilities you
need to setup your product. Insert the DVD and follow the steps in the autorun
program to install the drivers.
In case the program does not start, follow the sequence below to install the drivers.
Step 1 – Install Chipset Drivers
1.
Open the Step1 - Chipset folder followed by SetupChipset.exe
2.
Follow the instructions
3.
Drivers will be installed automatically
Step 2 – Install Graphics Drivers
1.
Open the Step2 - VGA folder followed by Setup.exe
2.
Follow the instructions
3.
Drivers will be installed automatically
Step 3 – Install LAN Drivers
1.
Click on the Step3 - LAN folder and select your OS
2.
Open the.exe file in the folder
3.
Follow the instructions
4.
Drivers will be installed automatically
Step 4 – Install Audio Drivers
1.
Open the Step4 - Audio folder followed by
0006-64bit_Win7_Win8_Win81_Win10_R279.exe
2.
Follow the instructions
Chapter 4 – Driver Installation
84
Advertisement
Table of Contents
