Table of Contents
Advertisement
4.1
Product CD/DVD
The PCM-QM77 comes with a product DVD that contains all the drivers and utilities
you need to setup your product. Insert the DVD and follow the steps in the autorun
program to install the drivers.
In case the program does not start, follow the sequence below to install the drivers.
Step 1 – Install Chipset Drivers
1.
Open the Step 1 – Chipset folder and select your OS
2.
Open the infinst_autol.exe file in the folder
3.
Follow the instructions
4.
Drivers will be installed automatically
Step 2 – Install Graphics Driver
1.
Open the STEP2 - VGA folder and select your OS
2.
Open the Setup.exe file in the folder
3.
Follow the instructions
4.
Drivers will be installed automatically
Note 1:
This motherboard supports VGA and LVDS display devices. In Single Display
mode. By default, press <Ctrl>+<Alt>+<F1> to switch to VGA device and
press <Ctrl>+<Alt>+<F3> to switch to LVDS device.
Before removing the current display device, connect the display device that
you want to use, and then press the hot keys to switch to that device.
Note 2: If you are using Windows
Framework first (dotnetfx35.exe in dotNet Framwork folder).
Chapter 4 – Driver Installation
®
XP , you have to install the driver of dotNet
99
Advertisement
Table of Contents
