Table of Contents
Advertisement
4.1
Product CD/DVD
The GENE-BT04 comes with a product DVD that contains all the drivers and utilities you
need to setup your product. Insert the DVD and follow the steps in the autorun
program to install the drivers.
In case the program does not start, follow the sequence below to install the drivers.
Step 1 – Install Chipset Drivers
1.
Open the Step1 - Chipset folder and select your OS
2.
Open the SetupChipset.exe file in the folder
3.
Follow the instructions
4.
Drivers will be installed automatically
Step 2 – Install Graphics Driver
1.
Open the Step2 - VGA folder and select your OS
2.
Open the Setup.exe file in the folder
3.
Follow the instructions
4.
Drivers will be installed automatically
Step 3 – Install LAN Driver
1.
Click on the Step3 - LAN folder and select your OS
2.
Open the .exe file in the folder
3.
Follow the instructions
4.
Drivers will be installed automatically
Step 4 – Install TXE Drivers (Windows 8.1/10 only)
1.
Open the Step4 - TXE folder and select your OS
Chapter 4 – Driver Installation
57
Advertisement
Table of Contents
