Table of Contents
Advertisement
4.1
Product CD/DVD
The PICO-BT01 comes with a product DVD that contains all the drivers and utilities you
need to setup your product. Insert the DVD and follow the steps in the autorun
program to install the drivers.
In case the program does not start, follow the sequence below to install the drivers.
Step 1 – Install Chipset Driver
1.
Open the Step1 - Chipset folder and open the SetupChipset.exe file
2.
Follow the instructions
3.
Drivers will be installed automatically
Step 2 – Install Graphics Driver
1.
Open the Step2 - Graphics folder and select your OS
2.
Open the Setup.exe file in the folder
3.
Follow the instructions
4.
Driver will be installed automatically
Step 3 – Install LAN Driver
1.
Open the Step3 - LAN folder followed by the I211 folder
2.
Select your OS
3.
Open the .exe file in the folder
4.
Follow the instructions
5.
Driver will be installed automatically
Chapter 4 – Driver Installation
67
Advertisement
Table of Contents
