Table of Contents
Advertisement
Using and Maintaining the Imager
Operations
Unloading and
loading the Film Tray
2-8
IMPORTANT: Leave the Imager powered on while loading or unloading
the film tray.
When 100 sheets of film have been used, a 0 film count appears on the
display screen.
1. Press the "unlock" button on the local panel to release the film tray.
2. Remove the film tray from the Imager.
3. Remove the old film insert from the tray and discard in a manner
suitable to local ordinances.
NOTE:
Before loading a new package of film, clean any particles from the
inside surface of the film tray, including the ramp and top edge of
the tray.
2G0733
Film insert
February 27, 2009
Advertisement
Table of Contents
