Remove An Active Device; Change Pin; Download Directory - AT&T TL91270 User Manual

Bluetooth
Bluetooth operation

Remove an active device

You can remove an active device from the active devices
list.
To remove an active device:
1. Press MENU/ on the handset when it is not
SELECT
in use.
2. Press CID or DIR to highlight Bluetooth, then press
/SELECT.
MENU
3. Press CID or DIR to highlight Active devices, then
press /SELECT.
MENU
4. Press CID or DIR to highlight the desired device, then
press /SELECT.
MENU
5. Press CID or DIR to highlight Remove active, then
press /SELECT. The handset displays Device
MENU
removed from active list.
NOTE: Even though the active device is removed from the active
devices list, it is still on the paired devices list.

Change PIN

You are required to enter a PIN when establishing a Bluetooth connection.
The default PIN of your telephone base is 0000.
To change the PIN:
1. Press MENU/ on the handset when it is not in use.
SELECT
2. Press CID or DIR to highlight Bluetooth, then press
/SELECT.
MENU
3. Press CID or DIR to highlight Change PIN, then press
/SELECT. The handset displays ENTER NEW PIN
MENU
and the existing PIN.
4. Use the dialing keys to enter a new four-digit code.
• Press /DELETE to erase a digit.
MUTE
• Press and hold /DELETE to erase all digits.
MUTE
• Press CID to move the cursor to the right or
5. Press /SELECT to save.
MENU
Answering sys
Directory
Cal l log
Intercom
Bluetooth
BLUETOOTH
Download dir
Add cel lular
Add headset
Active devices
SELECT DEVICE
1 Cel l Phone B
2 Cel l Phone
Disconnect
Remove active
Device removed
from
active list
BLUETOOTH
Add headset
Active devices
Paired devices
Change PIN
ENTER NEW PIN
0000
DIR to the left.
23
Bluetooth
Bluetooth operation

Download directory

You can download up to four cell phone directories (phonebooks) to your
TL92270/TL92370 telephone system via Bluetooth wireless technology.
Each downloaded directory can store up to 1,500 entries with up to
30 digits for each phone number and 15 characters for each name.
Before downloading the directory, make sure the cell phone is paired to
your TL92270/TL92370 and on the active devices list. Make sure the
handset battery is charged for at least 10 minutes.
Place your cell phone next to the telephone base when you download a
cell phone directory to your TL92270/TL92370.
To download a cell phone directory:
1. Press MENU/
in use.
CC
2. Press CID or
/SELECT.
MENU
3. Press
MENU
• If there is no cell phone paired to the system, the
handset displays No cellular device paired. Press
SELECT to add cellular.
4. Press CID or
press
MENU
• If the selected device is on the paired devices list but
not on the active devices list, the handset displays No
cellular on active devices list. Press SELECT to add.
• If the selected device is on the active devices list but
disconnected, the handset displays Not connected. To connect cell
place it next to the base. Press SELECT.
• If the selected device's directory has already been downloaded to
TL92270/TL92370 before, the handset displays Directory Cell Phone
A will be erased. To download press SELECT. If you press
/SELECT to continue the download process, the directory stored
MENU
on the TL92270/TL92370 for that cell phone will be erased and
replaced with the current cell phone directory. If you have edited the
downloaded entries (page 57), those changes will be lost.
• If you already have four downloaded directories, the handset displays
Memory is full. Replace current directory? Press SELECT when you
try to download another cell phone directory. Press
the system prompts you to replace an existing directory.
on the handset when it is not
SELECT
DIR to highlight Bluetooth, then press
/SELECT to choose Download dir.
DIR to select a desired device, then
/SELECT.
24
Answering sys
Directory
Cal l log
Intercom
Bluetooth
BLUETOOTH
Download dir
Add cel lular
Add headset
Active devices
SELECT DEVICE
Cel l Phone A
Cel l Phone BC
/SELECT and
MENU