Remove An Active Device; Change Pin - AT&T TL92270 User Manual

Bluetooth
Bluetooth setup

Remove an active device

You can remove an active device from the active
devices list.
To remove an active device:
1. Press MENU/
in use.
CID
2. Press or
/SELECT.
MENU
CID
3. Press or
/SELECT.
press
MENU
4. Press CID or
/SELECT.
press
MENU
5. Press CID or
press /SELECT. The handset displays Device
MENU
removed from active list.
NOTE: Even though the active device is removed from the active
devices list, it is still on the paired devices list.

Change PIN

You are required to enter a PIN when establishing a Bluetooth connection.
The default PIN of your telephone base is 0000.
To change the PIN:
Press MENU/
1.
the main menu.
CID
2. Press or
/SELECT.
MENU
3. Press CID or
/SELECT. The handset displays ENTER NEW PIN
MENU
and the existing PIN.
4. Use the dialing keys to enter a new four-digit code.
• Press
MUTE
• Press and hold
• Press CID
5. Press /SELECT to save.
MENU
on the handset when it is not
SELECT
DIR to highlight Bluetooth, then press
DIR to highlight Active devices, then
DIR to highlight the desired device, then
DIR to highlight Remove active, then
on the handset in idle mode to enter
SELECT
DIR to highlight Bluetooth, then press
DIR to highlight Change PIN, then press
/DELETE to erase a digit.
/DELETE to erase all digits.
MUTE
to move the cursor to the left or
23
Answering sys
Directory
Cal l log
Intercom
Bluetooth
BLUETOOTH
Download dir
Add cel lular
Add headset
Active devices
SELECT DEVICE
1 Cel l Phone B
2 Cel l Phone
Disconnect
Remove active
Device removed
from
active list
BLUETOOTH
Add headset
Active devices
Paired devices
Change PIN
ENTER NEW PIN
DIR to the right.
CC
0000