Table of Contents
Advertisement
Telephone operation
Call transfer and sharing
To transfer the outside call to a handset:
1.
When on an outside call, press MENU/
2.
Press CID or DIR to highlight Intercom, then press
/SELECT.
MENU
•
If you have a two-handset system, your handset
displays Calling other handset. The destination
handset rings and displays Other handset is calling.
•
If you have more than two handsets, your handset
displays INTERCOM TO: and a list of registered
handsets. Press CID or DIR to select a destination
handset and then press
/SELECT.
MENU
-OR-
•
Press 1-9 for Handset 1-9, *0 for Handset 10, *1 for Handset 11
and *2 for Handset 12 to select a destination handset and then press
/SELECT.
MENU
•
The destination handset rings and displays Handset X is calling.
3.
When the destination handset answers the intercom call, both screens
show Intercom.
4.
Press
/SELECT on the original handset.
MENU
5.
Press
/SELECT again to select Transfer to transfer
MENU
the outside call to another handset. After the call is
transferred, the original handset screen shows Call
transfered.
You can also share the outside call with another handset.
1.
Press
/SELECT during the intercom call.
MENU
2.
Press CID or DIR to highlight Share call and then
press
/SELECT to share the outside call with
MENU
another handset.
NOTES:
1.
When on intercom, you may press
handset to end the intercom. The destination handset shows Intercom ended and the
outside call continues with the original system handset.
2.
When on intercom, you may press
HOME/
destination handset to reconnect with the outside call. The original handset and
destination handset shares the outside call.
.
SELECT
Use headset
Intercom
Directory
Cal l log
INTERCOM TO:
Handset 2
Handset 3
Handset 4
Handset 5
Intercom
Transfer
Share cal l
OFF/
on your original handset or destination
CLEAR
on your original handset or
FLASH
51
Telephone operation
Equalizer setting
The equalizer feature on the handset enables you to change
the audio tone of the handset during an outside call,
intercom call or message playback.
Press EQ
while on a call, intercoming or listening to a
message or announcement to select the equalizer setting
from Treble 1, Treble 2, Bass or Natural (the default setting)
for the handset. The current setting is shown on the handset
for two seconds.
NOTES:
1.
The equalizer feature does not apply to the speakerphone on the
telephone base and the connected Bluetooth headset.
2.
If you switch the call between the handset and speakerphone by
pressing
SPEAKER, the audio setting remains unchanged.
3.
The current equalizer setting remains unchanged until a new setting
is selected.
Treble 1
Treble 2
Bass
Natural
52
Advertisement
Table of Contents
