Related Manuals for AT&T TL90070
Summary of Contents for AT&T TL90070
- Page 1 User’s manual TL90070 DECT 6.0 expansion handset for use with AT&T models TL91270/TL91370/TL92220/ TL92270/TL92320/TL92370/ TL92420/TL92470 cordless telephone with BLUETOOTH® wireless technology...
- Page 2 © 2009 Advanced American Telephones. All Rights Reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to Advanced American Telephones, San Antonio, TX 78219. Printed in China. 1 (800) 222-3111 or call TL90070 DECT 6.0 expansion handset . In...
- Page 3 Compatible with Telephones identified with this logo have reduced Hearing Aid T-Coil noise and interference when used with most T-coil equipped hearing aids and cochlear implants. The TIA-1083 Compliant Logo is a trademark of the Telecommunications Industry Association. Used under license. TIA-1083 The ENERGY STAR®...
-
Page 4: Parts Checklist
Parts checklist Your telephone package contains the following items. User’s manual TL90070 DECT 6.0 expansion handset for use with AT&T models TL91270/TL91370/TL92220/ TL92270/TL92320/TL92370/ TL92420/TL92470 cordless telephone with BLUETOOTH® wireless technology User’s manual Battery for cordless handset Cordless handset Charger for cordless... -
Page 5: Table Of Contents
TL90070 DECT 6.0 expansion handset for use with AT&T models TL91270/TL91370/TL92220/ TL92270/TL92320/TL92370/ TL92420/TL92470 cordless telephone with BLUETOOTH® wireless technology Table of contents Getting started Quick reference guide ... 1 Installation ... 5 Charger installation ... 6 Battery installation and charging ... 7 Battery charging ... -
Page 6: Getting Started
Quick reference guide CID /-VOLUME Press to scroll down while in menus. Press to decrease the volume level during a call. Press to show the caller ID history when the telephone is not in use. While entering names or numbers in the directory, press to move the cursor to the left. - Page 7 Quick reference guide While reviewing a caller ID history entry, press repeatedly to add or remove 1 in front of the telephone number before dialing or saving it in the directory. TONE Press to switch to tone dialing temporarily during a call if you have pulse service.
-
Page 8: Using Menus
Quick reference guide Using menus Press MENU/SELECT in idle mode (when the telephone is not in use) to enter the main menu. Use CID or DIR to scroll through menu items Press MENU/SELECT to select or save the highlighted item. -OR- Press OFF/CLEAR to cancel an operation, back up to the previous menu... -
Page 9: Main Menu
Quick reference guide Main menu The selected menu item is highlighted. For TL92220/TL92270/TL92320/TL92370/TL92420/TL92470: Play messages Answering sys Directory Cal l log Intercom For TL91270/TL91370: Directory Cal l log Intercom Bluetooth Ringers Feature menu Play messages Answering sys Directory Call log Intercom Bluetooth Ringers... -
Page 10: Installation
Installation You must install and charge the handset battery before using the cordless handset. Your product may be shipped with a protective sticker covering the handset or telephone base display - remove it before use. For customer service or product information, visit our website at www.telephones.att.com 1 (866) 288-4268 Canada, dial... -
Page 11: Charger Installation
Charger installation IMPORTANT INFORMATION: Use only the power adapter(s) provided with this product. To obtain a replacement, visit our website at 1 (800) 222-3111 call 1 (866) 288-4268 The power adapters are intended to be correctly oriented in a vertical or floor mount position. -
Page 12: Battery Installation And Charging
Battery installation and charging Install the battery as shown below. Step 1 Plug the battery connector securely into the socket inside the handset battery compartment, matching the color-coded label. Insert the supplied battery with the label THIS SIDE UP facing up as indicated. - Page 13 Battery installation and charging IMPORTANT INFORMATION: Use only the supplied rechargeable battery or replacement battery (model BT166342). To order, visit our website at www.telephones.att.com 1 (866) 288-4268 Canada, dial If you do not use the handset for a long time, disconnect and remove the battery to prevent possible leakage.
-
Page 14: Battery Charging
Battery charging Once you have installed the battery, the screen indicates the battery status (see table below). If necessary, place the handset in the telephone base or charger to charge the battery. For best performance, keep the handset in the telephone base or charger when not in use. - Page 15 Adding handset to your telephone base Adding handset to your telephone base Adding and registering handsets Before using a new TL90070 handset, you must register it with the AT&T TL91270/TL91370/TL92220/TL92270/TL92320/ TL92370/TL92420/TL92470 telephone system (purchased separately). The AT&T TL91270/TL91370/TL92220/TL92270/ TL92320/TL92370/TL92420/TL92470 telephone system can accommodate up to 12 handsets.
-
Page 16: Appendix
Expand your telephone system Add and register a handset When first purchased, each expansion handset shows Press and hold HANDSET LOCATOR on base for 4 sec, then press # on handset after a battery is installed. Each handset should be charged without interruption for at least 30 minutes before registering to the telephone base. -
Page 17: Replace A Handset
Replace a handset If you want to replace a handset or re-assign the designated handset number of a registered handset, you must deregister all the handsets and then individually register each handset. To make deregistration easier, read all of the instructions on this page before you begin. -
Page 18: Troubleshooting
Troubleshooting If you have difficulty with your telephone, please try the suggestions below. For Customer Service, or to purchase accessories or replacement parts, visit our website at telephones.att.com 1 (866) 288-4268 Canada, dial found on the underside of your telephone, available when contacting customer service. - Page 19 Troubleshooting I cannot get a dial tone. • First try all the suggestions above. • Move the cordless handset closer to the telephone base. You might have moved out of range. • If the previous suggestions don’t work, disconnect the telephone base from the telephone jack and connect to a different phone.
- Page 20 Troubleshooting My cordless handset isn’t performing normally. • Make sure the power cord is securely plugged into the telephone base. Plug the power adapter into a different, working electrical outlet not controlled by a wall switch. • Move the cordless handset closer to the telephone base. You might have moved out of range.
- Page 21 Troubleshooting Out of range OR No power at base appears on my cordless handset. • Ensure that the telephone base is powered up. • Place the cordless handset in the telephone base for one minute to allow the cordless handset and base to resynchronize channels.
- Page 22 Troubleshooting I get noise, static, or a weak signal even when I’m near the telephone base. • If you subscribe to high-speed Internet service (digital subscriber line - DSL) through your telephone lines, you must install a DSL filter between the telephone line cord and the telephone wall jack.
- Page 23 Troubleshooting I experience poor sound quality when using the speakerphone. • For increased sound quality while using the speakerphone, place the handset on a flat surface with the dial pad facing up. • When using a speakerphone, controlling background noise in your environment is essential.
- Page 24 Troubleshooting • The cordless handset may be too far from the telephone base. • Charge the battery in the cordless handset for at least 16 hours. For optimum daily performance, return the cordless handset to the telephone base or charger when not in use. •...
- Page 25 Troubleshooting My calls cut in and out while I’m using my cordless handset. • Other electronic products can cause interference with your cordless phone. Try installing your phone as far away as possible from electronic devices such as wireless routers, or other cordless telephones.
- Page 26 Troubleshooting The charge light is off. • Make sure the power and line cords are plugged in correctly and securely. • Unplug the electrical power. Wait for 15 seconds, then plug it back in. Allow up to one minute for the cordless handset and telephone base to reset.
- Page 27 Troubleshooting I subscribe to a non-traditional telephone service that uses my computer to establish connections, and my telephone doesn’t work. • Make sure your computer is powered on. • Make sure your Internet connection is working properly. • Make sure that the software is installed and running for your non-traditional telephone service.
-
Page 28: Maintenance
Maintenance Taking care of your telephone • Your cordless telephone contains sophisticated electronic parts, so it must be treated with care. • Avoid rough treatment. • Place the handset down gently. • Save the original packing materials to protect your telephone if you ever need to ship it. -
Page 29: Important Safety Information
Important safety information This symbol is to alert you to important operating or servicing instructions that may appear in this user’s manual. Always follow basic safety precautions when using this product to reduce the risk of injury, fire, or electric shock. Safety information •... -
Page 30: Especially About Corded Telephones
Important safety information Especially about corded telephones • Privacy: The same features that make a cordless telephone convenient create some limitations. Telephone calls are transmitted between the telephone base and the handset by radio waves, so there is a possibility that your cordless telephone conversations could be intercepted by radio receiving equipment within range of the cordless handset. -
Page 31: Precautions For Users Of Implanted Cardiac Pacemakers
Important safety information Precautions for users of implanted cardiac pacemakers Cardiac pacemakers (applies only to digital cordless telephones): Wireless Technology Research, LLC (WTR), an independent research entity, led a multidisciplinary evaluation of the interference between portable wireless telephones and implanted cardiac pacemakers. Supported by the U.S. Food and Drug Administration, WTR recommends to physicians that: Pacemaker patients •... -
Page 32: Fcc Part 68 And Acta
Appendix FCC Part 68 and ACTA This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Council for Terminal Attachments (ACTA). The label on the back or bottom of this equipment contains, among other things, a product identifier in the format US:AAAEQ##TXXXX. - Page 33 FCC Part 68 and ACTA If this product is equipped with a corded or cordless handset, it is hearing aid compatible. If this product has memory dialing locations, you may choose to store emergency telephone numbers (e.g., police, fire, medical) in these locations. If you do store or test emergency numbers, please: •...
-
Page 34: Fcc Part 15
FCC Part 15 This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation. -
Page 35: Limited Warranty
Limited warranty The AT&T brand is used under license - any repair, replacement or warranty service, and all questions about this product should be directed to: In the United States of America, call telephones.att.com What does this limited warranty cover? The manufacturer of this AT&T-branded product warrants to the holder of a valid proof of purchase (“CONSUMER”... - Page 36 Limited warranty What is not covered by this limited warranty? This limited warranty does not cover: • PRODUCT that has been subjected to misuse, accident, shipping or other physical damage, improper installation, abnormal operation or handling, neglect, inundation, fire, water, or other liquid intrusion; or •...
- Page 37 Limited warranty What must you return with the PRODUCT to get warranty service? You must: Return the entire original package and contents including the PRODUCT to the service location along with a description of the malfunction or difficulty; and Include “valid proof of purchase” (sales receipt) identifying the PRODUCT purchased (PRODUCT model) and the date of purchase or receipt;...
-
Page 38: Technical Specifications
Technical specifications RF frequency band Channels Operating temperature Handset voltage Charger voltage (AC adapter output) Replacement battery Operating time* * Operating times varies depending on your actual use and the age of the battery. DECT 6.0 digital technology The AT&T DECT 6.0 products offer unsurpassed range performance and sound clarity. -
Page 39: Extended Range And Clarity
Appendix Technical specifications Extended range and clarity This telephone base comes with an antenna which gives much better clarity and covers a longer range than before. - Page 40 www.telephones.att.com The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by Advanced American Telephones and its parent, VTech Holdings Limited, is under license. VTech Holdings Limited is a member of Bluetooth SIG, Inc. Other trademarks and trade names are those of their respective owners.