Add An Active Device - AT&T TL91270 User Manual

Bluetooth
Bluetooth setup
Replace an active device
When you already have two devices on the active devices list, you can
replace an active device with a device on the paired devices list.
To replace an active device:
1. Press MENU/ on the handset when it is not
SELECT
in use.
2. Press CID or DIR to highlight Bluetooth, then press
/SELECT.
MENU
3. Press CID or DIR to highlight Paired devices, then
press /SELECT.
MENU
4. Press CID or DIR to highlight a device, then press
/SELECT.
MENU
5. Press CID or DIR to highlight Connect, then press
/SELECT. The handset displays Maximum of
MENU
2 devices can be connected and then Replace an
existing active device with cellular? Press SELECT.
6. Press /SELECT. You are prompted to select a device
MENU
on the paired devices list.
7. Press CID or DIR to highlight the device to be
replaced, then press /SELECT. The handset displays
MENU
Device removed from active list and then Connecting
Cell Phone B to the base...
8. Depending on your cell phone settings, you may
need to press a key on your cell phone to confirm the
connection. When you successfully replace and connect
an active device with a paired device, the handset
displays Device connected.
Answering sys
Directory
Cal l log
Intercom
Bluetooth
BLUETOOTH
Add cel lular
Add headset
Active devices
Paired devices
SELECT DEVICE
1 Headset A
2 Cel l Phone
Connect
Rename
Remove paired
Replace an
existing active
device with
cel lular?
Press SELECT
REPLACE DEVICE
1 Cel l Phone A
2 Cel l Phone
21
Bluetooth
Bluetooth operation

Add an active device

You can have a maximum of two devices on the active devices list.
To add an active device:
1. Press MENU/
2. Press CID or
/SELECT.
MENU
3. Press CID or
press
MENU
4. Press CID or
press
MENU
5. When Add displays, press
prompted to select a device from the paired devices list.
6. Press CID or
press
MENU
to active list and then Connecting Cell Phone B to the
AC
base...
7. Depending on your cell phone settings, you may
need to press a key on your cell phone to confirm the
connection. When you successfully add and connect an
active device, the handset displays Device connected.
BC
on the handset when it is not in use.
SELECT
DIR to highlight Bluetooth, then press
DIR to highlight Active devices, then
/SELECT.
DIR to highlight an empty position, then
/SELECT.
/SELECT. You are
MENU
DIR to select one paired device, then
/SELECT. The handset displays Device added
22
Answering sys
Directory
Cal l log
Intercom
Bluetooth
BLUETOOTH
Dowload dir
Add cel lular
Add headset
Active devices
SELECT DEVICE
1 Cel l Phone A
2 Empty
Add
SELECT DEVICE
1 Cel l Phone B
2 Cel l Phone CC