Chain Dialing; Review The Redial List; Dial A Redial Entry; Redial Stack - AT&T TL91270 User Manual

Telephone operation

Chain dialing

Use this feature to initiate a dialing sequence from numbers stored in the
directory, call log or redial while you are on a call.
Chain dialing can be useful if you wish to access other numbers (such as bank
account numbers or access codes) from the directory, call log or redial list.
To access a number in the directory while on a call:
1. Press MENU/ .
SELECT
2. Press CID or DIR to highlight Directory, then press
3. Press /SELECT to select Home directory.
MENU
4. Press CID or DIR to scroll to the desired entry or perform an
alphabetical search (page 57).
5. Press /SELECT to dial the displayed number.
MENU
To access a number in the call log while on a call:
1. Press MENU/ .
SELECT
2. Press CID or DIR to highlight Call log, then press
3. Press CID or DIR to scroll to the desired entry.
4. Press /SELECT to dial the displayed number.
MENU
To access the redial list while on a call:
1. Press REDIAL/ .
PAUSE
2. Press DIR, CID or REDIAL/
PAUSE
press /SELECT. If you do not press
MENU
the number displayed will be dialed automatically.
NOTES:
1. You cannot edit a directory entry while on a call. For more details about the directory,
see page 53.
2. You cannot copy a caller ID entry into the directory while on a call. For more details
about the caller ID history, see page 60.
3. You can only view the numbers in the directory, call log or redial while on a call and
cannot erase any entries.
4. Press OFF/ to exit redial, directory or caller log and return while on a call.
CLEAR
/SELECT.
MENU
/SELECT.
MENU
until the desired number displays, then
/SELECT within two seconds,
MENU
45
Telephone operation

Redial stack

The handset stores the twenty numbers (up to 30 digits each) recently called
from this handset in the redial list.

Review the redial list

1. Press REDIAL/ in idle mode.
PAUSE
2. Press CID, DIR or REDIAL/
PAUSE
desired number displays. The handset beeps twice at
the end of the list.
Press OFF/ to exit.
CLEAR

Dial a redial entry

1. Press HOME/ or SPEAKER, then press
FLASH
REDIAL/ repeatedly to view the redial memory. The
PAUSE
displayed number you view for over two seconds will be
automatically dialed out.
-OR-
1. Press REDIAL/ in idle mode.
PAUSE
2. Press CID, DIR or REDIAL/
PAUSE
displays. The handset beeps twice at the end of the list.
3. Press HOME/ or SPEAKER to use the home line.
FLASH
-OR-
Press CELLULAR to use the cell line.
to browse until the
REDIAL
888-883-2445
to browse until the desired number
46