Telephone operation
Options while on calls
Temporary tone dialing
If you have pulse (rotary) service only, you can switch from pulse to touch
tone dialing temporarily during a call. This is useful if you need to send touch
tone signals to access your telephone banking or long distance services.
During a call:
1.
Press TONE .
2.
Use the dialing keys to enter the relevant number. The telephone sends
touch tone signals.
3.
The telephone automatically returns to pulse dialing mode after you end
the call.
Hold
You can place a home or cell call on hold. You will hear an alert tone if you
have not taken the call off of hold after 14 minutes. You will hear another
alert tone 30 seconds later. At 15 minutes on hold, the call on hold
automatically disconnects.
To place a home call on hold:
•
Press HOLD. Home call on hold appears and
HOME/
flashes.
FLASH
To resume a home call on hold:
•
Press
HOME/
.
FLASH
To place a cell call on hold:
•
Press HOLD. Cell call on hold appears and
CELLULAR flashes.
To resume a cell call on hold:
•
Press
CELLULAR.
43
Telephone operation
Handset locator
This feature helps you find a misplaced handset.
To start paging:
Press
HANDSET LOCATOR on the telephone
base when it is not in use. All idle handsets
ring and display ** Paging ** .
To end paging:
Press
HANDSET LOCATOR on the telephone
base.
-OR-
Press
HOME/
,
SPEAKER or any
FLASH
dialing keys (0-9, #, TONE ) on the handset.
NOTES:
1.
If the ringer volume for all are set to off, the handset sill rings when paging.
2.
If there is no response after 60 seconds, paging ends.
44