Table of Contents
Advertisement
Bluetooth
Bluetooth setup
Replace an active device
If you already have 2 active devices on the device list and you want to activate
a different device, you must deactivate one of the 2 active devices.
To replace an active device:
MENU
1. Press
in use.
2. Press
CALLER ID
SELECT
then press
3. Press
CALLER ID
then press
SELECT
4. Press
CALLER ID
device you want to activate without a D1: or D2:
prefix, then press
5. Press
CALLER ID
then press
SELECT
devices in slot 1 or 2 can be ready for connection and
then a list of devices for deactivation.
6. Press
CALLER ID
be deactivated, then press
Phone X is deactivated. and you hear a confirmation
tone. The screen then displays
Connecting Cell Phone Y to the base... (Cell Phone X
and Cell Phone Y represent the device names of your
cell phones).
7. Depending on your cell phone settings, you may
need to press a key on your cell phone to confirm
the connection. When the new device is successfully
activated and connected, the screen displays
Device connected. You hear a confirmation tone.
Note: When adding, removing, or replacing a Bluetooth device on the active devices list, all connected devices
are temporarily disconnected until the procedure completes. It may take up to 2 minutes to reconnect.
on the telephone base when it is not
or
DIRECTORY
.
or
DIRECTORY
.
or
DIRECTORY
OPTION
.
or
DIRECTORY
. The screen displays Only BT
or
DIRECTORY
NEXT
to highlight Bluetooth,
to highlight Device list,
to highlight the
to highlight Connect,
to highlight the device to
. The screen displays Cell
30
BLUETOOTH
Add device
Device list
Download dir
BACK
SELECT
DEVICE LIST
D1:Cel l Phone X
D2:Headset X
Cel l Phone Y
BACK
OPTION
Only BT devices
in slot 1 or 2
can be ready
for connection
DEACTIVATE
D1:Cel l Phone X
D2:Headset X
BACK
NEXT
Connecting
Cel l Phone Y
to the base...
DEVICE LIST
D1:Cel l Phone Y
D2:Headset X
Cel l Phone X
BACK
OPTION
Advertisement
Table of Contents
