Table of Contents
Advertisement
Handset settings
Telephone settings
Key tone
The handset is factory programmed to beep with each key press. If you turn
off the Key tone, there are no beeps when you press keys.
To change the setting:
1.
Press MENU/
in idle mode to enter the main menu.
SELECT
2.
Use CID or DIR to scroll to Settings, then press
/SELECT.
MENU
3.
Press CID or DIR to scroll to Key tone, then press
/SELECT.
MENU
4.
Press CID or DIR to select On or Off, then press
/SELECT. You hear a confirmation tone.
MENU
Website
You can use this feature to view the AT&T website address.
1.
Press MENU/
in idle mode to enter the main menu.
SELECT
2.
Use CID or DIR to scroll to Website, then press
/SELECT. The handset screen shows the AT&T
MENU
website address.
3.
Press
OFF/
to exit
CLEAR
SETTINGS
LCD language
Clr voicemail
Key tone
Set date/time
KEY TONE
On
Off
Intercom
Bluetooth
Ringers
Settings
Website
www.telephnes.
att.com
29
Handset settings
Telephone settings
Set date/time
The answering system announces the day and time of each message prior
to playing it. If you subscribe to caller ID service, the day, month and time
are set automatically with each incoming call. The year must be set so that
the day of the week can be calculated from the caller ID information. Before
using the answering system, set the date and time as follows.
After a power failure or the first handset registration, the system reminds you
to set the date and time for backup before entering the idle mode.
To change the setting:
1.
Press MENU/
on the handset in idle mode.
SELECT
2.
Press CID or DIR to highlight Settings, then press
/SELECT.
MENU
3.
Press CID or DIR to highlight Set date/time, then
press
/SELECT.
MENU
4.
Press
/SELECT again to select Date & time.
MENU
5.
Press CID or DIR to select the month, or enter the
correct number using the dial pad, then press
/SELECT to confirm.
MENU
6.
Press CID or DIR to select the day, or enter the
correct number using the dial pad, then press
/SELECT to confirm.
MENU
7.
Press CID or DIR to select the year, or enter the
correct number using the dial pad, then press
/SELECT to confirm.
MENU
8.
Press CID or DIR to select the hour, or enter the
correct number using the dial pad, then press
SELECT to confirm.
9.
Press CID or DIR to select the minute, or enter the correct number
using the dial pad, then press
MENU
10.
Press CID or DIR to choose AM or PM, then press
confirm. You hear a confirmation tone.
NOTE: If the clock is not set when a message is recorded, the system announces, "Time
and day not set" before the message is played.
SETTINGS
LCD language
Clr voicemail
Key tone
Set date/time
SET DATE/TIME
Date & time
CID time sync
SET DATE
01/01/09
MM/DD/YY
SET TIME
06:08 PM
/
MENU
/SELECT to confirm.
/SELECT to
MENU
30
Advertisement
Table of Contents
