Table of Contents
Advertisement
Getting started
Wall-mount installation
Wall-mount to tabletop installation
To change the telephone base from the wall-mount position to tabletop
position, follow the steps below.
1. Remove the wall-mount bracket from the wall. If the telephone line cord
and power adapter cord are bundled, untie them first.
2. Lift the telephone base up to detach it from the plastic wall-mount
bracket. Unplug the telephone line cord (or DSL filter) from the wall. Unplug
the power adapter from the power outlet.
3. See Telephone base installation on page 6.
11
Bluetooth
Introducing Bluetooth
Your new AT&T TL92270/TL92370 telephone system with Bluetooth wireless
technology has the following features:
•
Pair up to four Bluetooth enabled cell phones with the telephone base.
•
Connect a maximum of two cell phones to make and receive cell calls.
Only one cell phone can be active on a call at a time.
•
Connect a Bluetooth enabled headset for making and receiving home calls.
•
Conference cell and home calls.
•
Make and receive calls using your cell phone plan while utilizing the ease
and comfort of your home telephone system.
IMPORTANT INFORMATION
•
After plugging in the telephone base, wait at least 20 seconds before
connecting a Bluetooth device. The screen shows Bluetooth system busy if
you try to connect too soon.
•
Refer to the user's manual of your Bluetooth enabled cell phone or
headset for more information about how that device uses Bluetooth
connectivity.
•
Bluetooth wireless technology operates within a short range (about 1
to 30 feet) from the telephone base. Keep connected cell phones and
headset within this range.
•
If your cell phone has poor reception in your home, the TL92270/
TL92370 cannot improve the reception. However, if you have a location
in your house with better reception, you can leave your cell phone in that
location while you use the TL92270/TL92370 cell line. In order for this to
work, the telephone base must be within 30 feet of the cell phone.
•
Charge your cell phone while it is connected to the telephone base. Your
cell phone's battery will discharge faster while it is connected to the
telephone base via Bluetooth wireless technology.
•
Monitor your cell phone's usage because minutes are deducted from your
cellular plan for the duration of all cell calls.
Refer to the Bluetooth setup section (pages 14-21) to learn how to set up
your Bluetooth device. Refer to the Handset operation section (pages 22-26)
on how to operate your Bluetooth devices with your new TL92270/TL92370
AT&T telephone system with Bluetooth wireless technology. Refer to the
Troubleshooting section (pages 78-86) if you experience difficulty when
using the telephone system.
The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by Advanced
American Telephones and its parent, VTech Holdings Limited, is under license. VTech Holdings Limited is a
member of Bluetooth SIG, Inc. Other trademarks and trade names are those of their respective owners.
12
Advertisement
Table of Contents
