Configuring Your Wireless Connection - Arris Touchstone TG2492 User Manual

Note: For best performance, use high-quality coax cable and minimize or eliminate
splitters between the cable jack and the Telephony Gateway.
2. Insert the plug from the power cord into the Power connector on the back of the
Telephony Gateway (7) and insert the power cord into a convenient AC outlet.
Note: Use only the external AC power adapter (if provided) and power cord included with
the equipment.
Note: Make sure that the rear panel power switch (8) is set to the ON position.
The Power light on the front of the Telephony Gateway lights up, then flashes once (refer
to the LED tables shown in Using the Telephony Gateway). See
if the Power light does not turn on.
3. Connect one end of the Ethernet cable to any Ethernet port on the back of the Telephony
Gateway, (3) and the other end to the Ethernet port on a computer, hub, or broadband
router.
Note: If you are connecting to a computer, use the Ethernet cable included in the
Telephony Gateway package.
4. Connect one end of the telephone cable to the telephone port on the back of the
Telephony Gateway (1 or 2). Connect the other end to the telephone.

Configuring Your Wireless Connection

The TG2492 ships with wireless LAN security set by default. See the security label on your
product for the factory security settings.
Note: You must set up your computer and other client devices to work with the security
settings on the TG2492. Refer to the documentation for your client device for instructions on
setting security. On most computer systems you only need to select the network name (SSID)
device and enter the encryption key. If your computer or client device supports Wi-Fi Alliance
WPS (Wireless Protected Setup), activate WPS on your computer or client device and the
TG2492 simultaneously to easily set up your system security.
Release 24 STANDARD 1.2 April 2016
© ARRIS Enterprises, LLC, 2015-2016. All Rights Reserved.
Chapter 4: Installing and Connecting your Telephony Gateway
Touchstone TG2492 Telephony Gateway User Guide
Troubleshooting (page 37)
23