Accessing The Configuration Interface - Arris Touchstone TG2492 User Manual

1. Security Label
If you need to modify the Telephony Gateway's default wireless security settings, or if you
want to configure any other wireless LAN settings, refer to the following instructions.

Accessing the Configuration Interface

Follow these steps to access the configuration interface. You should have already set up the
TG2492 as described in
1. If security has been properly set up on your computer to access the wireless LAN on the
TG2492, use the connection utility for your operating system to connect to the wireless
LAN using its network name (SSID), as shown on the security label.
2. If you cannot access the wireless LAN, you must first establish a wired Ethernet connection
between your computer and the TG2492.
3. In your web browser, open the page http://192.168.0.1/ to access the wireless router
setup.
The Login screen displays.
Note: The default user name is "admin". The default password is "password", in lower
case letters.
4. Enter the user name and password and click the Apply button to log in.
Release 24 STANDARD 1.2 April 2016
© ARRIS Enterprises, LLC, 2015-2016. All Rights Reserved.
Chapter 4: Installing and Connecting your Telephony Gateway
Installing and Connecting your Telephony Gateway
Touchstone TG2492 Telephony Gateway User Guide
(page 17).
24