The Power light on the front of the Telephony Gateway lights up, then flashes once (refer
to the LED tables shown in
(page 46) if the Power light does not turn on.
3. Connect one end of the Ethernet cable to any Ethernet port on the back of the Telephony
Gateway, (5) and the other end to the Ethernet port on a computer, hub, or broadband
router.
Note: If you are connecting to a computer, use the Ethernet cable included in the
Telephony Gateway package.
4. Connect one end of the telephone cable to the telephone port on the back of the
Telephony Gateway (3 or 4). Connect the other end to the telephone.
Configuring Your Wireless Connection
The TG2472G ships with wireless LAN security set by default. See the security label on your
product for the factory security settings.
Release 24 STANDARD 1.3 August 2016
© 2015-2016 ARRIS Enterprises LLC. All Rights Reserved.
Chapter 5: Installing and Connecting your Telephony Gateway
Using the Telephony Gateway
Touchstone TG2472G Telephony Gateway User Guide
Troubleshooting
(page 39)). See
31