Configuring Your Wireless Connection; Accessing The Configuration Interface - Arris Touchstone TG3482 User Manual

Telephony gateway
Table of Contents

Advertisement

3. Connect one end of the Ethernet cable to any Ethernet port on the back of the Telephony
Gateway (2) and the other end to the Ethernet port on a computer, hub, or broadband
router.
Note: If you are connecting to a computer, use the Ethernet cable included in the
Telephony Gateway package.
4. Connect one end of the telephone cable to any telephone port on the back of the
Telephony Gateway (1). Connect the other end to the telephone.

Configuring Your Wireless Connection

The TG3482 ships with wireless LAN security set by default. See the security label on your
product for the factory security settings.
Note: You must set up your computer and other client devices to work with the security
settings on the TG3482. Refer to the documentation for your client device for instructions on
setting security. On most computer systems you only need to select the network name (SSID)
device and enter the encryption key. If your computer or client device supports Wi-Fi Alliance
WPS (Wireless Protected Setup), activate WPS on your computer or client device and the
TG3482 simultaneously to easily set up your system security.
1. Security Label
If you need to modify the Telephony Gateway's default wireless security settings, or if you
want to configure any other wireless LAN settings, refer to the following instructions.

Accessing the Configuration Interface

Follow these steps to access the configuration interface. You should have already set up the
TG3482 as described in
1. If security has been properly set up on your computer to access the wireless LAN on the
TG3482, use the connection utility for your operating system to connect to the wireless
LAN using its network name (SSID), as shown on the security label.
2. If you cannot access the wireless LAN, you must first establish a wired Ethernet connection
between your computer and the TG3482.
3. In your web browser, open the page http://192.168.0.1/ to access the wireless router
setup.
Release 34 DRAFT 1.0 July 2016
© 2016 ARRIS Enterprises LLC. All Rights Reserved.
Chapter 3: Installing and Connecting your Telephony Gateway
Installing and Connecting your Telephony Gateway
Touchstone TG3482 Telephony Gateway User Guide
(page 16).
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents