2. Double-click the local area connection to be used for your device's network connection.
The Local Area Connection Status widow displays.
3. Click Properties.
4. Select
TCP/IP
5. Click the
6. Click
OK
7. You may have to restart your computer in order for your computer to obtain a new IP
address from the network.
TCP/IP Configuration for Windows Vista
Follow these steps to configure the Ethernet interface on a Windows Vista operating system.
1. Open the Vista Control Panel.
2. Double-click
Window.
3. Click
Manage network
Connection.
The Network Connections window displays.
4. Double-click the
Note: If Windows requests permission to continue, click Continue.
5. Double-click
Note: If your cable provider requires TCP/IP version 6, double-click
Version 6 (TCP/IPv6)
The TCP/IP properties window for the version you selected displays.
6. For either TCP/IPv4 or TCP/IPv6, select
DNS server address
7. Click
OK
TCP/IP Configuration for Windows 7, Windows 8, or
Windows 10
Follow these steps to configure the Ethernet interface on a Windows 7, Windows 8, or
Windows 10 operating system.
1. Click the
2. Select
Network and Sharing Center
3. Click
Change adapter settings
Release 24 STANDARD 1.2 April 2016
© ARRIS Enterprises, LLC, 2015-2016. All Rights Reserved.
by clicking it one time. Then click Properties.
General
tab. Then click
to accept the new settings, and
Network and Sharing Center
connections. If prompted for a connection, choose
Local Area Connection
Internet Protocol Version 4 (TCP/IPv4)
to configure TCP/IPv6.
automatically, unless instructed otherwise by your cable provider.
to accept the new settings and close the Properties window.
Start
network and sharing
menu and type
from the left-side menu.
Chapter 5: Configuring Your Ethernet Connection
Obtain an IP address automatically
OK
again to close the Properties window.
to display the Network and Sharing Center
to open the Properties window:
to configure TCP/IPv4.
Obtain an IP address automatically
into the Search box.
when it appears.
Touchstone TG2492 Telephony Gateway User Guide
and click OK.
Local Area
Internet Protocol
and
Obtain
29