Safety Requirements - Arris Touchstone TG2492 User Manual

Safety Requirements

The ARRIS Telephony Gateway complies with the applicable requirements for performance,
construction, labeling, and information when used as outlined below:
CAUTION
Potential equipment damage
Potential loss of service
Connecting the Telephony Gateway to existing telephone wiring should only be performed by
a professional installer. Physical connections to the previous telephone provider must be
removed and the wiring must be checked; there must not be any voltages. Cancelation of
telephone service is not adequate. Failure to do so may result in loss of service and/or
permanent damage to the Telephony Gateway.
CAUTION
Risk of shock
Mains voltages inside this unit. No user serviceable parts inside. Refer service to qualified
personnel only!
The Telephony Gateway is designed to be connected directly to a telephone.

Connecting the Telephony Gateway to the home's existing telephone wiring should only

be performed by a professional installer.
Do not use product near water (i.e. wet basement, bathtub, sink or near a swimming pool,

etc.), to avoid risk of electrocution.
Do not use the telephone to report a gas leak in the vicinity of the leak.

The product shall be cleaned using only a damp, lint-free, cloth. No solvents or cleaning

agents shall be used.
Do not use spray cleaners or aerosols on the gateway.

Avoid using and/or connecting the equipment during an electrical storm, to avoid risk of

electrocution.
Do not locate the equipment within 6 feet (1.9 m) of a flame or ignition source (i.e. heat

registers, space heaters, fireplaces, etc.).
Use only the external AC power adapter (if provided) and power cord included with the

equipment.
Equipment should be installed near the power outlet and should be easily accessible.

Release 24 STANDARD 1.2 April 2016
© ARRIS Enterprises, LLC, 2015-2016. All Rights Reserved.
Touchstone TG2492 Telephony Gateway User Guide
Chapter 1
5