Using The Reset Button - Arris Touchstone TG2492 User Manual

Using the Reset Button

Use the Reset button (4), on the back of the Telephony Gateway, to reset the modem and
perform initialization as if you power cycled the unit. You may need to reset the Telephony
Gateway if you are having problems connecting to the Internet. Using this button will be rare.
Use a pointed non-metallic object to press this button. The Reset button is recessed to
prevent accidental resets.
Note: The rear panel power switch can also be used to power cycle the unit.
1. Tel 1
2. Tel 2
3. Ethernet (1 - 4)
4. Reset button
Release 24 STANDARD 1.2 April 2016
© ARRIS Enterprises, LLC, 2015-2016. All Rights Reserved.
Chapter 6: Using the Telephony Gateway
5. USB
6. Cable
7. Power
8. Power switch
Touchstone TG2492 Telephony Gateway User Guide
35