Configuring Your Wireless Connection - Arris Touchstone TG3492LG-LIB User Manual

2. Insert the plug from the power cord into the Power connector on the back of the
Telephony Gateway (6) and insert the power cord into a convenient AC outlet.
Note: Use only the external AC power adapter (if provided) and power cord included
with the equipment.
Note: Make sure that the rear panel power switch (7) is set to the ON position.
The Power light on the front of the Telephony Gateway lights up, then flashes once
(refer to the LED tables shown in Using the Telephony Gateway). See
(page 35) if the Power light does not turn on.
3. Connect one end of the Ethernet cable to any Ethernet port on the back of the
Telephony Gateway, (3) and the other end to the Ethernet port on a computer, hub, or
broadband router.
Note: If you are connecting to a computer, use the Ethernet cable included in the
Telephony Gateway package.
4. Connect one end of the telephone cable to the telephone port on the back of the
Telephony Gateway (1 or 2). Connect the other end to the telephone.

Configuring Your Wireless Connection

The TG3492LG-LIB ships with wireless LAN security set by default. See the security label on
your product for the factory security settings.
Note: You must set up your computer and other client devices to work with the security
settings on the TG3492LG-LIB. Refer to the documentation for your client device for
instructions on setting security. On most computer systems you only need to select the
network name (SSID) device and enter the encryption key. If your computer or client device
supports Wi-Fi Alliance WPS (Wireless Protected Setup), activate WPS on your computer or
client device and the TG3492LG-LIB simultaneously to easily set up your system security.
1. Security Label
Release 34 DRAFT 1.1 January 2018
© 2018 ARRIS Enterprises LLC. All Rights Reserved.
Chapter 4: Installing and Connecting your Telephony Gateway
Touchstone TG3492LG-LIB Telephony Gateway User Guide
Troubleshooting
22