HEIDENHAIN TNC 370 User Manual page 98

4 Programming
l-
4.8 Marking Blocks to be Skipped
During a program run or test run, the
TNC ignores the program blocks
that are marked to be jumped over
(see page 3-7).
To mark blocks
Fig. 4.15: Blocks marked with '/"
ACTL. )(
-25,500
T
I
+21,325
q 0
+150,000
C +90>000
Select a block that should not be executed each time.
Mark the block by entering the "r sign at the beginning of the block.
To erase the "1" sign
Select the block in which you wish to erase the 'I/" sign.
Erase the 'I/" sign.
TNC370
4-25