HEIDENHAIN TNC 370 User Manual page 60

2
Manual Operation and Setup
4
-
2.1 Moving the Machine Axes
Traversing with the axis direction keys
-
0
Press the axis direction key and hold it for as long as you wish the
e.g. X+
axis to move.
\
/
You can move several axes at once in this way
For continuing movement:
Press and hold the machine axis direction, then press the NC start
key:
The axis continues to move after you release the keys.
-
I together J
\
To stop the axis, press the NC stop key.
2-2
TNC 370