Ordering - GE L60 Instruction Manual

Line phase comparison relay, ur series
Hide thumbs Also See for L60:
Table of Contents

Advertisement

2.1 INTRODUCTION
Table 2–2: OTHER DEVICE FUNCTIONS
FUNCTION
Breaker Arcing Current (I
Breaker Control
Contact Inputs (up to 96)
2
Contact Outputs (up to 64)
Control Pushbuttons
CT Failure Detector
Data Logger
Digital Counters (8)
Digital Elements (48)
DNP 3.0 or IEC 60870-5-104 Communications
Event Recorder
Fault Location
Fault Reporting
FlexElements™ (8)
FlexLogic™ Equations
Line Pickup
Load Encroachment
Metering: Current, Voltage, Power, Frequency
The L60 is available as a 19-inch rack horizontal mount unit or a reduced size (¾) vertical mount unit, and consists of the
following modules: CPU, faceplate, power supply, CPU, CT/VT, digital input/outputs, and inter-relay communications. Each
of these modules can be supplied in a number of configurations specified at the time of ordering. The information required
to completely specify the relay is provided in the following tables (see chapter 3 for full details of relay modules).
The L60 is specified with two CT/VT modules (8F and 8P). When the L60 is applied in two-breaker configurations (such as
breaker-and-a-half or ring configurations), the currents from the two CTs are summed internally within the relay or exter-
nally. If the voltage is not supplies to the relay, some functions (such as distance, undervoltage, and synchrocheck) will not
be available.
Order codes are subject to change without notice. Refer to the GE Multilin ordering page at
trial.com/multilin/order.htm
NOTE
2-4
FUNCTION
2
t)
IEC 61850 Communications (optional)
Modbus Communications
Modbus User Map
Non-Volatile Latches
Non-Volatile Selector Switch
Open Breaker Echo
Oscillography
Pilot Scheme (POTT)
Setting Groups (6)
Time Synchronization over SNTP
Transducer Inputs/Outputs
User Definable Display
User Programmable LEDs
User Programmable Pushbuttons
User Programmable Self-Tests
Virtual Inputs (64)
Virtual Outputs (96)
VT Fuse Failure
for the latest details concerning L60 ordering options.
L60 Line Phase Comparison Relay
2 PRODUCT DESCRIPTION

2.1.2 ORDERING

http://www.GEindus-
GE Multilin

Advertisement

Table of Contents
loading

Table of Contents