GE L60 Instruction Manual page 127

5 SETTINGS
Since GSSE/GOOSE messages are multicast Ethernet by specification, they will not usually be forwarded by net-
work routers. However, GOOSE messages may be fowarded by routers if the router has been configured for VLAN
NOTE
functionality.
h) WEB SERVER HTTP PROTOCOL
PATH: SETTINGS PRODUCT SETUP
WEB SERVER
HTTP PROTOCOL
The L60 contains an embedded web server and is capable of transferring web pages to a web browser such as Microsoft
Internet Explorer or Netscape Navigator. This feature is available only if the L60 has the ethernet option installed. The web
pages are organized as a series of menus that can be accessed starting at the L60 "Main Menu". Web pages are available
showing DNP and IEC 60870-5-104 points lists, Modbus registers, Event Records, Fault Reports, etc. The web pages can
be accessed by connecting the UR and a computer to an ethernet network. The Main Menu will be displayed in the web
browser on the computer simply by entering the IP address of the L60 into the "Address" box on the web browser.
i) TFTP PROTOCOL
PATH: SETTINGS PRODUCT SETUP
TFTP PROTOCOL
MESSAGE
MESSAGE
The Trivial File Transfer Protocol (TFTP) can be used to transfer files from the L60 over a network. The L60 operates as a
TFTP server. TFTP client software is available from various sources, including Microsoft Windows NT. The dir.txt file
obtained from the L60 contains a list and description of all available files (event records, oscillography, etc.).
GE Multilin
COMMUNICATIONS WEB SERVER HTTP PROTOCOL
HTTP TCP PORT
NUMBER: 80
COMMUNICATIONS TFTP PROTOCOL
TFTP MAIN UDP PORT
NUMBER: 69
TFTP DATA UDP PORT 1
NUMBER: 0
TFTP DATA UDP PORT 2
NUMBER: 0
L60 Line Phase Comparison Relay
5.2 PRODUCT SETUP
Range: 1 to 65535 in steps of 1
Range: 1 to 65535 in steps of 1
Range: 0 to 65535 in steps of 1
Range: 0 to 65535 in steps of 1
5
5-25