Advertisement
One of the following results occur.:
•
The display shows Pswd enabled, indicating that
the radio lock feature is enabled.
•
The display shows Pswd disabled, indicating that
the radio lock feature is disabled.
Radio Stun and Kill
Radio Stun
This feature allows you to stun another radio by
sending an over the air command using the menu on
your radio. This feature prevents an unauthorized
user from using the radio. Once the radio is stunned,
a password is required to re-activate the stunned
radio.
Using Radio Stun
1
or to Stun.
2 Press the Menu Select button directly below
Stun.
The display shows Enter Password.
3 Use the keypad to enter your Tactical Inhibit
Encode Password.
126
English
4 Press the Menu Select button directly below Ok.
The display shows radio Contact IDs.
5 Perform one of the following actions:
•
or
to the required ID.
Press the Menu Select button directly below
•
LNum to go to the last number dialed.
Use the keypad to enter the required ID.
•
Press the Menu Select button directly below
•
Send to initiate command.
If the receiving radio does not have encryption key
to decrypt the received command, your radio
display shows Ack received.
If the receiving radio does not have encryption key
to decrypt the received encrypted command, your
radio display shows Decrypt failed.
If the receiving radio is powered off, your radio
display shows No Acknowledgement.
Once the receiving radio received the command, its
screen locked and request for password.
Note
To un-stun a radio, follow the procedure in
Unlocking Your Radio
on page 123.
Advertisement
