Changing The Tactical Inhibit Password; Radio Stun And Kill - Motorola APX 2000 User Manual

8 Press the Menu Select button directly below Ok .
9 Re-enter the new password.
10 Press the Menu Select button directly below Ok .
The password is updated.
If the two passwords do not match, repeat
NOTE: If you enter three incorrect old passwords, the radio exits the password feature. You
cannot access this feature again until you turn the radio off and on.
7.19.3

Changing the Tactical Inhibit Password

The Tactical Inhibit Password is required for the Radio Stun and Radio Kill features. You can set up to
eight characters for this password.
Procedure:
1 or to Pswd.
2 Press the Menu Select button directly below Pswd.
The display shows Change Password screen.
3 or to Tactical Inh Encode Pswd.
4 Press the Menu Select button directly below Sel .
5 Enter the old password.
6 Press the Menu Select button directly below Ok .
7 Enter the new password.
8 Press the Menu Select button directly below Ok .
9 Re-enter the new password.
10 Press the Menu Select button directly below Ok .
The password is updated.
If the two passwords do not match, repeat
NOTE: If you enter three incorrect passwords, the radio exits the password feature. You
cannot access this feature again until you turn the radio off and on.
7.20

Radio Stun and Kill

This chapter explains the radio stun and kill features.
step 5 through step 10.
step 5 through step
68012005014-HV
Chapter 7 : Advanced Features
10.
101