Radio Stun And Kill; Radio Stun; Using Radio Stun - Motorola 3.5 User Manual

English

Radio Stun and Kill

This chapter explains the radio stun and kill features.

Radio Stun

This feature allows you to stun another radio by sending an
over the air command using the menu on your radio. This
feature prevents an unauthorized user from using the radio.
Once the radio is stunned, a password is required to re-
activate the stunned radio.

Using Radio Stun

1
or to Stun.
2 Press the Menu Select button directly below Stun.
The display shows Enter Password.
3 Use the keypad to enter your Tactical Inhibit Encode
Password.
4 Press the Menu Select button directly below Ok .
The display shows radio Contact IDs.
144
5 Perform one of the following actions:
• or to the required ID.
• Press the Menu Select button directly below
LNum to go to the last number dialed.
• Use the keypad to enter the required ID.
• Press the Menu Select button directly below
Send to initiate command.
If the receiving radio does not have encryption key to
decrypt the received command, your radio display
shows Ack received.
If the receiving radio does not have encryption key to
decrypt the received encrypted command, your radio
display shows Decrypt failed.
If the receiving radio is powered off or already killed,
your radio display shows No Acknowledgment.
Once the receiving radio received the command, its screen
locked and request for password.
NOTICE:
To un-stun a radio, follow the procedure in
Unlocking Your Radio on page 141.