Radio Stun And Kill; Radio Stun; Using Radio Stun - Motorola APX 7000XE User Manual

NOTICE: If you enter three incorrect passwords, the radio exits the password feature.
You cannot access this feature again until you turn the radio off and on.
2.17

Radio Stun and Kill

This chapter explains the radio stun and kill features.
2.17.1

Radio Stun

This feature allows you to stun another radio by sending an over the air command using the menu on
your radio. This feature prevents an unauthorized user from using the radio. Once the radio is stunned,
a password is required to re-activate the stunned radio.
2.17.1.1

Using Radio Stun

Procedure:
1 or to Stun.
2 Press the Menu Select button directly below Stun.
The display shows Enter Password.
3 Use the keypad to enter your Tactical Inhibit Encode Password.
4 Press the Menu Select button directly below Ok .
The display shows radio Contact IDs.
5 Perform one of the following actions.
• or to the required ID.
• Press the Menu Select button directly below LNum to go to the last number dialed.
• Use the keypad to enter the required ID.
• Press the Menu Select button directly below Send to initiate command.
If the receiving radio does not have encryption key to decrypt the received command, your radio
display shows Ack received.
If the receiving radio does not have encryption key to decrypt the received encrypted command,
your radio display shows Decrypt failed.
If the receiving radio is powered off or already killed, your radio display shows No
Acknowledgment.
Once the receiving radio received the command, its screen locked and request for password.
NOTICE: To un-stun a radio, follow the procedure in Unlocking Your Radio.
68012006089-FK
Advanced Features
111