8.41. NITRITE, MARINE ULTRA LOW RANGE
SPECIFICATIONS
Range
Resolution
Accuracy
Light Source
Method
REQUIRED REAGENTS
Code
HI764‑25
REAGENT SETS
HI764‑25
For other accessories see page 200.
MEASUREMENT PROCEDURE
• Select the
Nitrite, Marine ULR
described in the Method Selection section (see page 18).
• Fill the cuvette with 10 mL of unreacted sample (up to the
mark) and replace the cap.
• Place the cuvette into the holder and close the lid.
• Press the Zero key. The display will show "‑0.0‑" when the meter is zeroed and ready for
measurement.
• Remove the cuvette.
• Add one packet of
Reagent. Replace the cap and shake gently for about
15 seconds.
134
0 to 200 µg/L (as N0
‑N)
‑
2
1 µg/L
±10 µg/L ±4% of reading at 25 °C
LED with narrow band interference filter @ 466 nm
Adaptation of the EPA Diazotization method 354.1.
Description
Nitrite Ultra Low Range Reagent
Reagents for 25 tests
method using the procedure
HI764‑25
Nitrite Ultra Low Range
Quantity
1 packet
10 mL