Procedure 6-7 To Specify Plug-Ins Using The Cli - Alcatel-Lucent 5620 Troubleshooting Manual

3

Procedure 6-7 To specify plug-ins using the CLI

Perform this procedure to specify a plug-in for the current LogViewer CLI session.
1
2
3
Alcatel-Lucent 5620 Service Aware Manager, Release
3HE 05723 AAAD TQZZA Edition 01
iv Enter the absolute or relative path of the log file that you want to add and
press ↵. LogViewer adds the file to the list in the open menu.
Note — The LogViewer CLI supports file drag-and-drop functionality.
v Enter the following at the prompt to return to the root prompt:
root ↵
To configure LogViewer file parsing, perform the following steps.
Press ↵ to enter command mode.
i
ii Enter the following at the root prompt:
options ↵
The following prompt is displayed:
log-options>
Enter y ↵ at the prompt to confirm the action.
iii
iv To specify whether LogViewer parses the entire log file, enter the following
at the prompt:
parseAll ↵
A confirmation prompt is displayed.
v To force LogViewer to reparse the current log file, enter the following at the
prompt:
reparse ↵
If you are prompted to enable parsing of the entire log file, enter y ↵.
vi
vii Enter the following at the prompt to return to the root prompt:
root ↵
Open the LogViewer CLI.
Press ↵ to enter command mode.
Enter the following at the root prompt:
plugin ↵
Troubleshooting Guide
8.0 R4 Aug 2010
6 — 5620 SAM LogViewer
6-21