Using Lsp Ping - Alcatel-Lucent 5620 Troubleshooting Manual

Service aware manager release 8.0
Hide thumbs Also See for 5620:
Table of Contents

Advertisement

4 — Troubleshooting services and connectivity
Displayed message
Request Timeout
Orig-SDP Non-Existent
Orig-SDP Admin-Down
Orig-SDP Oper-Down
Request Terminated
Far End: Originator-ID Invalid
Far End: Responder-ID Invalid
Far End:Resp-SDP Non-Existent
Far End:Resp-SDP Invalid
Far End:Resp-SDP Down
Success
10
11
Procedure 4-9 To verify end-to-end connectivity of an MPLS LSP

using LSP Ping

1
2
4-14
Table 4-4 Tunnel OAM diagnostic results
a
If the Tunnel Ping passes, the network objects below the tunnel are
operating with no performance issues.
b
If the Tunnel Ping fails, go to step
workflow to verify the end-to-end connectivity of services using MPLS LSP
paths, if required.
If the service problem persists, another type of service problem may be present.
Perform the steps of the section
If the troubleshooting workflow does not identify the problem with your service,
contact your Alcatel-Lucent technical support representative. See section
more information.
Choose Tools→Service Test Manager (STM) from the 5620 SAM main menu. The
Manage Tests form appears.
Click on the Create button.
Aug 2010
Troubleshooting Guide
Description
The request timed out with a reply.
The request was not sent because the originating SDP does not
exist.
The request was not sent because the originating SDP
administrative state is Down.
The request was not sent because the originating SDP
operational state is Down.
The operator terminated the request before a reply was
received, or before the timeout of the request occurred.
The request was received by the far-end, but the far-end
indicates that the originating SDP ID is invalid.
The request was received by the far-end, but the responder ID
is not the same destination SDP ID that was specified.
The reply was received, but the return SDP ID used to respond
to the request does not exist.
The reply was received, but the return SDP ID used to respond
to the request is invalid.
The reply was received, but the return SDP ID indicates that the
administrative or operational state of the SDP is Down.
The tunnel is in service and working as expected. A reply was
received without any errors.
9 b iii
of the section
4.2
troubleshooting workflow.
Alcatel-Lucent 5620 Service Aware Manager, Release
4.2
troubleshooting
3HE 05723
AAAD
TQZZA Edition 01
1.4
for
8.0 R4

Advertisement

Table of Contents
loading

Table of Contents