Additional Information Required - Alcatel-Lucent 5620 Troubleshooting Manual

Service aware manager release 8.0
Hide thumbs Also See for 5620:
Table of Contents

Advertisement

Additional information required

When the value selected for a parameter has a that requires another parameter to be
configured, a warning message indicates the missing information that is required.
For example, when you configure a new or existing user with MD5 or SHA as the
value for the Authentication Protocol parameter, a password must be configured. If
you do not configure a password, a warning message is displayed, as shown in
Figure 12-2.
The warning message indicates the information that is required. In this case, click on
the OK button to close the dialog box, and configure the New Authentication
Password and Confirm New Auth Password parameters.
Unable to complete requested action
Warning messages are used to indicate that a specific action cannot be completed.
These warnings may occur when you try to create a new object or modify an existing
object that results in an unsupported configuration. For example, the message "Can't
bind LSP to a non-mpls service tunnel" indicates that you cannot bind an LSP to a
service tunnel that is not configured with the MPLS protocol.
These errors can be difficult to resolve and may require that you retrace your steps
to determine the cause of the warning. Check the documentation to ensure that you
are following procedures correctly.
Commitment of changes from a form and its sub-forms
From a configuration form, you can open sub-forms that require completion before
you continue with the parent form. For example, when you create a VLL service, the
Create Service Site form opens during one of the configuration steps. After you
configure parameters in this sub-form and click on the Finish button, a warning
message is displayed, as shown in Figure 12-3.
Alcatel-Lucent 5620 Service Aware Manager, Release
3HE 05723
AAAD
TQZZA Edition 01
12 — 5620 SAM client GUI warning message output
Figure 12-2 Password missing warning dialog box
Figure 12-3 Committing changes warning dialog box
8.0 R4
Aug 2010
Troubleshooting Guide
12-3

Advertisement

Table of Contents
loading

Table of Contents