Duplicate Configuration Form Conflicts - Alcatel-Lucent 5620 Troubleshooting Manual

Verify that the requested action is appropriate. Click on the checkbox beside the
statement "I understand the implications of this action" to continue with the action.

Duplicate configuration form conflicts

There are multiple ways to access a configuration form for the same object. For
example, you can view the configuration form for a port by choosing
Manage→Equipment, or you can access the port from the Application→Equipment
Window form. When you try to perform both accesses, a warning message is
displayed, as shown in Figure 12-7.
When this warning message is displayed, another form is open for the same object.
When two forms are open concurrently for the same object, there may be unexpected
results because changes committed from one form are not reflected in the other form.
12.2 Responding to 5620 SAM client GUI warning messages
The following procedure describes how to respond to a warning message when you
perform an action with the 5620 SAM client.
Procedure 12-1 To respond to a warning message
1
2
Alcatel-Lucent 5620 Service Aware Manager, Release
3HE 05723 AAAD TQZZA Edition 01
Figure 12-7 Duplicate form warning dialog box
Perform an action.
A warning message dialog box opens. For example, when you configure a site
password policy, at least one authentication order must be specified as the
default in order to configure the authentication order parameters. If at least one
authentication order is not configured, a warning message is displayed, as shown
in Figure 12-8.
Figure 12-8 Authentication warning dialog box
After you read the warning message, click on the OK button. The warning message
dialog box closes.
Troubleshooting Guide
12 — 5620 SAM client GUI warning message output
8.0 R4 Aug 2010
12-5