Alarm Description Tables - Alcatel-Lucent 5620 Troubleshooting Manual

3.5

Alarm description tables

The following tables describe the alarms that the 5620 SAM can raise. The tables are
in alphabetical order by domain, and the alarms within each table are in alphabetical
order. A Type or Probable cause value includes a numeric identifier.
Alarm
Name: AccountingPolicyDown
Type: AccountingPolicy (54)
Probable cause: accountingPolicyDown
(414)
Alarm
Name: SapStaticHostDynamicMacConflict
Type: configurationAlarm (11)
Probable cause:
LearnedDynamicMacAlreadyLearned (243)
Alarm
Name: IncorrectNeighborConfig
Type: configurationAlarm (11)
Probable cause: incorrectNeighborConfig
(452)
Alcatel-Lucent 5620 Service Aware Manager, Release
3HE 05723 AAAD TQZZA Edition 01
Note —
This section does not contain 9471 MME alarms.
For 9471 MME alarm descriptions, see the 9471 MME Alarms
Dictionary.
Table 3-2 Domain: accounting
Attributes
Severity: Critical
Object Type (class): Policy
Domain: accounting
Implicitly cleared (self-clearing): Yes
Table 3-3 Domain: antispoof
Attributes
Severity: Minor
Object Type (class):
AntiSpoofingStaticHosts
Domain: antispoof
Implicitly cleared (self-clearing): No
Table 3-4 Domain: aps
Attributes
Severity: Major
Object Type (class): ApsGroup
Domain: aps
Implicitly cleared (self-clearing): Yes
8.0 R4
Troubleshooting Guide
3 — Troubleshooting using network alarms
Additional information
The alarm is raised when an
accounting policy goes operationally
down after a file creation failure at
the specified admin and backup
locations.
Additional information
The alarm is raised when an NE tries
to learn a dynamic MAC address from
an IP-only static host.
Additional information
The alarm is raised when the peer
does not exist or the neighbor
address does not point to a network
interface on the NE that contains the
peer object.
Aug 2010
3-23