Response Time - Alcatel-Lucent 5620 Troubleshooting Manual

10 — Troubleshooting 5620 SAM server issues
Procedure 10-6 Problem: Excessive 5620 SAM server-to-client

response time

As the number of managed devices grows and as more GUI or OSS clients are brought
online, the processing load on the 5620 SAM system increases. For optimum 5620 SAM
performance, you must ensure that the 5620 SAM configuration meets the requirements
in the 5620 SAM Planning Guide as your network expands.
You can do the following to increase the available 5620 SAM server network
management resources:
See the 5620 SAM User Guide, 5620 SAM System Architecture Guide, and the
5620 SAM | 5650 CPAM Installation and Upgrade Guide for information about a
particular option. Contact Alcatel-Lucent support for reconfiguration assistance.
Perform this procedure to check the following:
1
2
3
4
10-8
Deploy the 5620 SAM system in a distributed configuration.
•
Deploy the 5620 SAM system in a redundant configuration.
•
Deploy 5620 SAM auxiliary servers.
•
• Reallocate the 5620 SAM server resources that are assigned to groups of
managed devices.
5620 SAM auxiliary server status
•
System performance may degrade if the number of available Preferred and
Reserved auxiliary servers drops below the number of configured Preferred
auxiliary servers.
5620 SAM main server status
•
Alarms raised against the 5620 SAM main server may provide information about
the performance degradation.
Caution — Only Alcatel-Lucent support staff are qualified to assess
and reconfigure a 5620 SAM deployment.
Open a 5620 SAM client GUI.
Choose Administration→System Information. The System Information form opens.
Click on the Faults tab button to view auxiliary server and general 5620 SAM
system alarm information, if required.
If your 5620 SAM deployment includes one or more auxiliary servers, perform the
following substeps to check the status of each auxiliary server.
i Click on the Auxiliary Servers tab button.
ii Review the list of auxiliary servers.
iii Select an auxiliary server in the list and click on the Properties button. The
properties form for the auxiliary server is displayed.
Aug 2010
Troubleshooting Guide
Alcatel-Lucent 5620 Service Aware Manager, Release
3HE 05723 AAAD TQZZA Edition 01
8.0 R4