Configuring Physical Ports With Cli - Alcatel-Lucent 7750 SR OS Interface Configuration Manual

Configuring Physical Ports with CLI

This section provides information to configure cards, MDAs, and ports.
Topics in this section include:
•
•
•
•
•
7750 SR OS Interface Configuration Guide
Preprovisioning Guidelines on page 98
→
Predefining Entities on page 98
→
Preprovisioning a Port on page 99
→
Maximizing Bandwidth Use on page 100
Basic Configuration on page 101
Common Configuration Tasks on page 102
→
Configuring Ports on page 107
Common Configuration Tasks on page 102
→
Configuring Cards and MDAs on page 103
−
Configuring MDA Access and Network Pool Parameters on page 106
→
Configuring Ports on page 107
−
Configuring Port Pool Parameters on page 107
−
Configuring APS Parameters on page 110
−
Configuring Ethernet Port Parameters on page 113
−
Configuring SONET/SDH Port Parameters on page 115
−
Configuring Channelized Ports on page 118
−
Configuring ATM Interface Parameters on page 137
−
Configuring Frame Relay Parameters on page 142
−
Configuring Multilink PPP Bundles on page 146
−
Configuring Multilink ATM Inverse Multiplexing (IMA) Bundles on page 147
−
Configuring Bundle Protection Group Ports on page 152
→
Configuring LAG Parameters on page 155
Service Management Tasks on page 156
→
Modifying or Deleting an MDA on page 156
→
Modifying a Card Type on page 157
→
Deleting a Card on page 157
→
Deleting Port Parameters on page 157
Interface Configuration
Page 97