Logviewer Cli Procedures - Alcatel-Lucent 5620 Troubleshooting Manual

7
8
6.5

LogViewer CLI procedures

The following procedures describe how to use the LogViewer CLI application.
Procedure 6-5 To display logs using the LogViewer CLI
Perform this procedure to start the LogViewer CLI application and view one or more
logs.
1
Alcatel-Lucent 5620 Service Aware Manager, Release
3HE 05723 AAAD TQZZA Edition 01
If you choose the E-Mail plug-in, perform the following steps.
i Specify a regular expression as a match criterion in the Message Filter field.
ii Configure the parameters:
To—specifies the e-mail address of the recipient
•
Password—specifies an SMTP password
•
Message Filter—specifies a regular expression that is used as a filter to
•
identify the log entries that invoke the plug-in
• Minimum E-mail Time (minutes)—specifies the minimum time between
messages that the plug-in sends, to prevent e-mail flooding
User—specifies a user name associated with the plug-in
•
• Host—specifies the name of an SMTP e-mail server
Body Prefix—specifies the text that precedes the log-entry text in an
•
e-mail message
From—specifies the sender e-mail address used by the plug-in
•
Subject—specifies the e-mail message subject line
•
Click on the OK button. The Local Log File form closes.
Log in to the 5620 SAM server as an administrator.
Note — If the 5620 SAM server is installed on Solaris, you must log in as
the samadmin user.
Troubleshooting Guide
8.0 R4 Aug 2010
6 — 5620 SAM LogViewer
6-15