Announcement (Broadcast) To All Members Of A Line Trunk Group - Unify OpenStage 20 T User Manual

42
Announcement (broadcast) to all members of a line
trunk group
You can use this function to send an announcement to all members (10 - 40) of
a line trunk group.
Z
Once you have activated the group call, you will hear a confirmation tone. You
can then begin the announcement.
^
Lift the handset.
or
n
Press the key and enter speakerphone mode.
j
Enter the system code for "Speaker call-1-way bcst" (contact the administrator
if necessary).
j
Enter the internal phone number of a group member.
Z
The loudspeakers on all group phones are automatically switched on and you
will hear a confirmation tone. You can begin the announcement.
\
You end the announcement by replacing the handset.
^
If a group member lifts their handset, they are connected to you and the an-
nouncement is ended.
n
If a group member presses the speaker key for the announcement, they are dis-
connected from the announcement. If the last remaining member of the group
presses the speaker key, the announcement ends.
Enhanced phone functions