Dialing With Call Charge Assignment; Dialing With Project Assignment; Call Duration Display - Unify OpenStage 20 T User Manual

52
PIN / COS?
PIN 1?
PIN 2?

Dialing with call charge assignment

You can assign external calls to certain projects.
Prerequisite: Project numbers (1 - 5) are configured for certain projects and
you have an account code (project code) for the project.

Dialing with project assignment

N
Open the Program/Service menu
j
Enter a service code between 61 (for project number 1) and 65 (for project num-
ber 5).
j
Enter the PIN.
or
N
Open the Program/Service menu
Select and confirm the option shown.
f
Confirm the option shown.
f
if nec.
Select and confirm PIN2 to PIN5.
f
j
Enter the external phone number.
Then make a call as usual
Project assignment is temporary. It is automatically switched off if you have
not used your phone, for example, for five minutes.

Call duration display

Call duration display is configured by the administrator. The display can show
either call duration or call charges. It can also be switched off.
The call duration appears in the first line of the display on the right as HH:MM:SS
and in 24-hour format. It is shown 10 seconds after the call starts.
The call charge display feature must be requested from the network operator
and configured by the administrator.
Dialing with call charge assignment
Page 16.

Page 16.

Page 17.
