Displays; Using Callback; Storing A Callback; Accepting A Callback - Unify OpenStage 20 T User Manual

26
Forwarding to
220870 PETER
Call forwarding is on
Callback?

Displays

In idle mode (

is activated:
Fixed/variable call forwarding
r
The key LED lights up.
f
Phone number of the forwarding destination
Call forwarding for internal/external
r
The key LED lights up.
f
There is no display message for the call forwarding types "Busy", "No an-
swer" and "Busy/no answer". The LED key does not light up.

Using callback

If your belongs to an ONS group (parallel call
following:
Callback on busy is only signaled on the busy phone, not in the whole ONS
group.
Callback on no reply is entered in the mailbox (
system phones in an ONS group.

Storing a callback

Prerequisite: The internal station called is busy or nobody answers.
Confirm the option shown.
f
If the called party was busy, the callback is automatic.
If the called party did not answer, a message is left in the called party's
mailbox.

Accepting a callback

Prerequisite: The internal station called was busy. You have saved a callback
request.
Z
Your telephone rings.
^
Lift the handset. You hear a ring tone.
or
n
Press the key shown. You hear a ring tone.
If the party has activated call forwarding (
callback from the call forwarding destination.
Page 13), the following signals remind you that call forwarding
Basic functions
Page 62), please note the

Page 14) on all internal

Page 22), you will receive the
