Speaker Call In A Group - Unify OpenStage 20 T User Manual

Enhanced phone functions
np

Speaker call in a group

You can also establish a normal connection within a group or team (with team
call = speed dial numbers 0-9 or 00-99 for team members) via a speaker call.
The speaker call is then initiated by a group telephone.
The "COM group speaker call" function is line-independent – all phones
can call each other via a speaker call.
Speaker call to a variable destination
^
Lift the handset.
or
n
Press the key and enter speakerphone mode.
j
Enter the system code for "COM group speaker call" (contact the administrator
if necessary).
j
Enter the speed dial number for the corresponding group member.
A connection is immediately established to this destination station's loudspeaker
if
• the station is not busy
• the handset has not been lifted
• "Do not disturb" is not activated
^
The called party accepts the DSS call by lifting the handset.
n
When the called party presses the speaker key, the connection is lost.
Two-way intercom to a variable destination
When using the two-way intercom in a group, the loudspeaker and the micro-
phone of the destination phone are automatically switched on.
^
Lift the handset.
or
n
Press the key and enter speakerphone mode.
j
Enter the system code for "Speaker call-two-way" (contact the administrator if
necessary).
j
Enter the speed dial number for the corresponding group member.
The loudspeaker and microphone of the destination phone are automatically
switched on.
41