8.3.4.5 Disarm
Step 5 of the installation wizard is the disarm phase.
Once section 7.7.11 "Aligning the ODUs" is complete pressing the "Disarm Installation Agent"
button completes the installation process
off. If the installer wishes to modify the installation configuration then the 'Back' link can be
used to access the installation wizard steps described above.
After disarming the wireless link the user is presented with one of two possible configuration
pages, see Figure 46 and Figure 47. The screen presents hyperlinks to the main
configuration and spectrum management pages.
10
The installation process is completed when both ends of the link are 'disarmed'.
T P
P T
Issue 1.1 April 2006
Figure 45: Disarm Installation
10
and the audible installation tone will be switched
FP T
Page 83