Table of Contents
Advertisement
For the more technically aware the installation metric is simple the instantaneous receive
power in dBm + 50.
It is hoped that the installation screen will aid the small population of installers that find it
difficult to differentiate the small changes in tonal output when peaking up long range and or
marginal links.
The PDA installation tool is accessed via a hidden URL http://<ip-address>/pda.cgi. It should
be noted that this link is only available after the user has logged in as system administrator.
The large screen version of the graphical user interface is available as a submenu option of
the installation wizard.
8.3.6
Software Upgrade
The Canopy 150/300 Mb BH system has two software image banks; one is a fixed image
which is stored in protected non-volatile memory and is not modifiable by the user, the
second bank is used by the system administrator to upgrade the firmware when necessary.
Figure 49 shows the main software upgrade webpage.
The 'Fixed' or 'Recovery' image is used by the System Administrator to:
•
Reset Ethernet configuration to default settings
•
Erase Configuration
•
Upgrade software
For a full description of the Recovery image see section 9 "Recovery Mode ".
The software upgrade pages are used to update a unit's operational software. The software
image
to
http://www.motorola.com/canopy
compressed zip file. Once the zip file has been downloaded the user should extract the
Canopy 150/300 Mb BH Software image, identifiable by its '.dld' file extension.
The first step (Figure 48) is to use the "Browse" button to locate the software image
previously downloaded to local storage. Once the image is located the user should press the
"Upload image to wireless unit" button to start the software upgrade process.
Issue 1.1 April 2006
Figure 48: Software Upgrade
be
uploaded
should
. The software image is delivered by Motorola as a
be
downloaded
to
local
storage
from
Page 85
Advertisement
Table of Contents
